Sparmax MAX-4 Airbrush
-1809-p.jpg?v=7b0ce7d1-41f6-48a7-8641-66648361c982)
-1809-p.jpg?v=7b0ce7d1-41f6-48a7-8641-66648361c982)
-1809-p.jpg?v=7b0ce7d1-41f6-48a7-8641-66648361c982)
The airbrush provides exceptional performance with even the smallest compressors because it atomises well at low pressures. It has a 0.4mm needle and nozzle combination for general purpose, high paint flow spraying and wider spray patterns. The 0.4mm nozzle is ideal when spraying thicker or heavier paints whilst still obtaining a fine level of detail.
It is a dual-action airbrush but can be easily converted to a single-action airbrush with the single-action air valve that is included. It also features a pre-set handle which limits the colour flow to avoid over-shooting and a crown cap allowing you to get closer to your work and thus achieve finer detail, whilst still protecting the needle.
Airbrush features:
Gravity-feed with 1/4 oz (7ml) fixed cup with lid
Dual-action airbrush with single-action valve included – converts the airbrush from a dual-action to a single-action airbrush (simple installation guide included)
Standard double-action (left) and single-action (right) air valves
Single-action air valve installed
The standard dual-action air valve installed
Internal-mix
0.4mm needle and nozzle combination for high performance, general purpose, high paint flow spraying and wider spray patterns
The fluid tip can be removed using the spanner provided
0.4mm nozzle suitable for thicker or heavier paints
Fine detail to 1" (0.4mm to 25mm) spray pattern with the one size nozzle
Ergonomic handle design with a pre-set colour flow control
Extra crown cap included
Both types of crown cap
The castellated version installed
The standard crown cap installed
Cleaning brush included
Replaceable internal PTFE solvent-proof needle packing for use with solvent-based paints
NOTE: This airbrush is warranted by The Airbrush Company Ltd against manufacturing defects of materials or workmanship for a period of 5 years from the original date of purchase. This warranty does not cover needles, nozzles, packing and o-rings, since these parts need to be replaced occasionally due to normal wear.
This looks to be a neat, no nonsense airbrush that will be ideal as a starter and once you decide you have got the hang of airbrushing and moved up to a more complex/expensive airbrush, it will still be very useful for overall applications like primer and varnish as well as spraying large areas one colour.
It is available for £47.50 plus P&P from The Airbrush Company, so visit them here for more details.This airbrush is also available as a kit with the Arism compressor.
It is a dual-action airbrush but can be easily converted to a single-action airbrush with the single-action air valve that is included. It also features a pre-set handle which limits the colour flow to avoid over-shooting and a crown cap allowing you to get closer to your work and thus achieve finer detail, whilst still protecting the needle.
Airbrush features:
Gravity-feed with 1/4 oz (7ml) fixed cup with lid
Dual-action airbrush with single-action valve included – converts the airbrush from a dual-action to a single-action airbrush (simple installation guide included)
Standard double-action (left) and single-action (right) air valves
Single-action air valve installed
The standard dual-action air valve installed
Internal-mix
0.4mm needle and nozzle combination for high performance, general purpose, high paint flow spraying and wider spray patterns
The fluid tip can be removed using the spanner provided
0.4mm nozzle suitable for thicker or heavier paints
Fine detail to 1" (0.4mm to 25mm) spray pattern with the one size nozzle
Ergonomic handle design with a pre-set colour flow control
Extra crown cap included
Both types of crown cap
The castellated version installed
The standard crown cap installed
Cleaning brush included
Replaceable internal PTFE solvent-proof needle packing for use with solvent-based paints
NOTE: This airbrush is warranted by The Airbrush Company Ltd against manufacturing defects of materials or workmanship for a period of 5 years from the original date of purchase. This warranty does not cover needles, nozzles, packing and o-rings, since these parts need to be replaced occasionally due to normal wear.
This looks to be a neat, no nonsense airbrush that will be ideal as a starter and once you decide you have got the hang of airbrushing and moved up to a more complex/expensive airbrush, it will still be very useful for overall applications like primer and varnish as well as spraying large areas one colour.
It is available for £47.50 plus P&P from The Airbrush Company, so visit them here for more details.This airbrush is also available as a kit with the Arism compressor.
